(2021-03-06, 19:56:58)VE3WI Dave Wrote: IC-7300 week at GBARC, I presume?

Modern rigs are typically specified for 13.8 ± 15% VDC supply, i.e. 11.7 - 15.8 V.  But, I've read many forum posts where owners of various brands were reporting various kinds of misbehaviours when the supply voltage is low. 

The IC-7300 CW splatter in the video is especially worrisome.  I wonder what happens on SSB?  

Portable ops on an SLA battery would be problematic due to the rapid drop in voltage with discharge.  A LiFePO4 would be much better.  You can find lots of data showing how the LiFePO4 holds its voltage nearly constant up to very deep discharge. 

Another solution would be a DC booster like the MFJ-4416.  Here's a link to a review by Phil Salas AD5X that was published in QST:
http://www.ad5x.com/images/Presentations/MFJ4416RevB.pdf

But, if anyone intends to "bin" their IC-7300, they can give it to me - I promise to supply it with enough voltage :-)

73
Dave, VE3WI

In the past my IC-7000 would be fine to ~10VDC on SSB but I haven't done any operating on CW on batteries. I imagine on CW it would probably pull the voltage down below the cut-off point. I think Icom manual said 10.5 vdc for minimum operating voltage. I will have to try it next time I go portable.
Here is an Amazon link for voltage regulator more affordable than MFJ for $40 CAD. As long you don't have to carry all that portable stuff on a hiking trip  then might be better to just go with a QRP rig that operates between 8 - 14vdc.  Few of them out there.
https://www.amazon.ca/Converter-DROK-Transformer-Regulator-Inverter/dp/B07KJZNWZY/ref=pd_di_sccai_19?pd_rd_w=AJJpO&pf_rd_p=e92f388e-b766-4f7f-aac1-ee1d0056e8fb&pf_rd_r=CEEKENM7GN3STD1QK2DK&pd_rd_r=9301e885-b27c-423c-8434-3d155865ddc5&pd_rd_wg=nJkGX&pd_rd_i=B07KJZNWZY&psc=1
For another $25  you can add this multimeter.
https://www.amazon.ca/DROK-Multimeter-6-5-100V-Backlight-Measuring/dp/B017FSED9I/ref=pd_bxgy_img_2/143-0142964-0294679?_encoding=UTF8&pd_rd_i=B017FSED9I&pd_rd_r=367b07f3-9ae6-4ee3-af38-3ea9248e26c0&pd_rd_w=3xaII&pd_rd_wg=eswan&pf_rd_p=42339929-297e-4141-b7b2-fe55db70f4b7&pf_rd_r=8DRTM93M78ZJN7EAWMD8&psc=1&refRID=8DRTM93M78ZJN7EAWMD8

(2021-03-07, 20:04:29)VE3WI Dave Wrote: The DROK could be the basis for a cheap & workable unit, with a box, connectors, etc.  I wonder how RF quiet it is.  Reviews of the MFJ-4416 talk about some RF noise.  Adam, why don't you buy one & test it for RFI?

The only competition in the ham area that I know of for the MFJ is the N8XJK booster.  His company went belly-up a while ago but West Mountain Radio is going to start selling them, according to their website.  It got good reviews when it was on sale.  It's pricier than the MFJ: $250 US vs $200.  For that much money, I would rather buy a solar panel to keep the battery topped up.

I have a 15 ah LiFePO4 battery that will run my little Xiegu X108 xcvr for hours.

73
Dave, VE3WI