GBARC Forum › Amateur Radio › Emergency Communication › Mesh Networks
Meshtastic explained

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Meshtastic explained
Marvin VE3VCG
Unregistered
 
#1
2021-03-12, 21:42:09 (This post was last modified: 2021-03-13, 00:41:51 by Tom VA3TS.)
Meshtastic is a great project which can be used in a variety of ways. One of these is to create off-grid mesh networks. Meshastic should not be confused with Mesh Net software which directly links phones together via onboard WiFi or Bluetooth. Meshtastic devices are a separate means of accomplishing mesh networking. This video helps explain the meshtastic approach to mesh networking Here's the link https://www.youtube.com/watch?v=gqAsWtIjHUY

IP Address: 24.138.152.116
Reply
Tom VA3TS Offline
Administrator
*******
Posts: 173
Threads: 99
Likes Received: 61 in 42 posts
Likes Given: 89
Joined: Jun 2019
Reputation: 513
#2
2021-03-13, 00:25:19
The 915MHz ESP32 LoRa OLED 0.96 SX1276 Transceiver Module + LoRa Antenna U.FL IPEX to SMA + 2P 1.25mm Connector for Arduino LoraWan IOT (Pack of 2)
are on amazon.ca ...   $68 for a pack of 2

IP Address: 23.91.225.36
Website Find
Reply
Tom VA3TS Offline
Administrator
*******
Posts: 173
Threads: 99
Likes Received: 61 in 42 posts
Likes Given: 89
Joined: Jun 2019
Reputation: 513
#3
2021-03-13, 00:40:48
Power supply options.... 

These devices use public domain frequencies, 915 mhz and limited to 25mW. A 6db antenna is permitted.

At 10V input voltage, the current draw was 0.099 A (or 9.99mA). – 0.099A = 99mA

At 5V, the current draw was a little higher, at 0.128 A (or 12.8mA). – 0.128A = 128mA

https://techexplorations.com/guides/esp32/begin/power/
IP Address: 23.91.225.36
Website Find
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)